Wiegand
Contents
You can configure the format for reading card data. The card data is processed in the set Wiegand format.
Note
| ▪ | The data format of the card already assigned to the user will be changed. |
| 1) | Click Settings > CARD FORMAT. |
| 2) | Click Wiegand. |
| 3) | Click  from the list and then configure the settings. |
No. |
Item |
Description |
||
|---|---|---|---|---|
1 |
Name |
Enter a Wiegand format name. |
||
2 |
Description |
Enter a short description. |
||
3 |
Total Bits |
Enter the total bit count. |
||
4 |
Facility Code Field |
You can set whether or not to use a facility code. If you want to use a facility code, click |
||
4 |
ID Field |
Enter a start bit and end bit of the ID to use. Click + Add to add an ID field. |
||
5 |
Parity Bits |
Click + Add to add a parity bit. Enter the position of the parity bit to use and the start and end bit.
|
(check box) and enter a start bit and end bit.
| 3) | Click Apply to add the Wiegand format. |
Note
| ▪ | Pre-defined formats cannot be edited or deleted. |